如何进行彩色套色印刷包装厂彩色套色印刷中线网印刷制版的制作方法丝印纸镂空版制作—将所设计的画稿用描图纸复下来，再将复下去的画稿按每一种颜色复印纸在丝印纸上，有几种颜色 复印几张丝印纸，在复印丝印之前，印刷公司应在描图纸搞画稿白处上、下各标记 “十”字校版记号，然后用同样方法，在同样大小的丝印纸上复印出上、下“十”字校版记号，以便在制作套色丝网版时，能准确套出吻合较好的彩色画面。
How to carry out color color printing plate factory color printing color printing plate making method of midline net printing paper stencil making the design drawings with tracing paper complex down, then re down drawings per color copy paper in printing paper, there are several color printing many copies in the copy paper, printing before the printing company should engage in tracing paper drawings at the upper and the lower parts of the white mark "ten" word mark the school version, and then use the same method, the copy of "ten" word mark in the school edition of the same size printing paper, in order to make chromatic screen version, can accurately set consistent color good picture.
Copy paper in printing each color pattern with a hollow, each hollow a silk screen version to check in on the manuscript, see the screen and the original paper is hollow with screen printing paper of various colors will be hollowed out, ready to box, in the box before the wooden frame of each color are calibration in the original version, and then in every frame above also do the "ten" school edition mark. Quality control in digital printing so that each frame screen can be accurately set. The hollow screen printing paper on the table on the flat, album printing screen frame "ten" word alignment mark printed on the paper "ten" word mark, according to the standard, should be based on the film by the hollow oriented, full screen frame printing paper to wipe it again, make the film shrinkage solution after bonding onto the screen. After solvent volatilization, check whether there is not place such as cement and banana water stick it, finally the printing paper on the other side of the plastic paper gently peeled off into screen printing, screen printing paper also engraved on the side which was only with color, force should be uniform, do not the bottom plastic paper breaking moment. Methods: the original photographic plate or a pen trace photographic film or transferred to a glass plate with a pen trace of ink must use carbon ink, the positive Yang lines in an original version, sticker printing must be marked and positive "with ten" school edition mark method.
将复印 在丝印纸上每一种色的图案用刻刀镂空，每镂空一个丝印版要套在原稿上检查，看镂空的丝印纸是否与原稿吻合，将各种颜色的丝印纸镂空后，就准备上框，在上框 前，每一种色的木框都要在原稿上校准版，然后在每一个木框上边也做上“十”字校版记号。数字印刷中的质量控制以便每个框丝印时能准确套版。将镂空的丝印纸放在平整的工作台上， 画册印刷丝网框的“十”字标记对准印纸上的“十”字标记，按准以后，应以有膜被镂空的那面向上，丝网框内全擦一遍，使丝印纸上的药膜缩解后粘接在丝网上。待溶剂挥发后，检查是否有未被粘牢的地方如有再用香蕉水将其粘牢，最后再将丝印纸另一面上的塑料纸轻轻揭下来便成了丝网漏版印刷，另外，在雕刻丝印纸时只刻有颜色药膜的哪一面，用力要均匀，切勿将底面塑料纸刻破。感光制版：将原稿用笔描或照相的方法转移到透明胶片或玻璃板上用笔描所用的墨水必须用碳素墨水，所制得的正片为阳纹版，印刷包装厂在原稿与正片上都要标好“十”校版记号方法同前。